nanoPAC nP4

Super compact multifunction programmable controller

Control under control!

    
Intuitive: open programming logic and wide availability of pre-existing functional blocks. Freely customizable touch screen operator interface.
    
Flexible: allows to realize the best possible solution for the customer, expansion modules to increase the number of available resources.
    
Connected: nanoPAC is 4.0, connects the machines and aligns them with the requirements for incentives and super-amortization.
    
Reliable: training support always guaranteed by the experience of Ascon Tecnologic, a reliable partner for the realization of each new project.

Base unit nP4:

  • Programmable control unit according to IEC61131-3 standard
  • ARM Cortex M7 32 bit, 216 MHz processor
  • Memory 16 MB Flash, 32 MB SDRAM, 128 KB MRAM
  • 1x 10/100 MB Ethernet port
  • 0/1/2 serial: RS232 / 485 + 1 RS485 (optional, isolated)
  • USB port: Micro USB type AB (Data log, backup, upload, firmware upgrade, application loading)
  • Protocols: Modbus TCP (Server), Modbus RTU (Master and Slave), ASCII
  • Inputs:
       
    - 4 universal analog inputs: Configurable 0/1 ... 5 V, 0/2 ... 10 V, 0/4 ... 20 mA, TC (J, K, L, N, R, S, T),
    PT100 (2
    wires), PT1000, NTC (103AT-2), Potentiometer, 5V Ratiometric
        - 8/16 digital inputs + 2 for fast counting
  • Outputs:
        
    - 0/2/4 Analogue outputs: Configurable 0/1... 5 V, 0/2... 10 V, 0/4... 20 mA
        
    - 8/16 digital outputs
        
    - 4 Relays / for piloting SSR
  • Power supply: 24 Vdc (-15 ... +25%)
  • Dimensions: 105 x 110 x 60 mm (6 DIN modules)
  • Mounting on OMEGA guide DIN A type
  • Removable spring clamps
  • Possibility of expansion through exPAC external modules (eP4)
  • Case available in dark gray and white colors

    VISIT OUR DEDICATED SITE: www.at-nanopac.com

Click here to download free of charge AT Sigmaline Configurator Wizard Tool