Programming key - A01

Programming key

The key is able to “dialogue” with:
* An instrument and to copy parameters from it to the key and vice versa
* A second key and to integrally copy its parameters
* A PC
* A PC and an instrument

A01 is able to recovery data from failed instruments too and permits unlimited copies of configuration, error free.

Power supply:
- 9V to 12 VDC (from external power supply)
Power supply output to power the controllers for programming purposes

Functions:
Selectable by 4 dip switches:

- Mode 1 Check up of the key firmware version
- Mode 2 Data copy, from instrument to key
- Mode 3 Data copy, from key to key
- Mode 4 Both configurations and data/programs copy, from key to instrument
- Mode 5 Configuration copy, from key to instrument
- Mode 6 Programs/data copy, from key to instrument
- Mode 7 USB – RS 485 converter
- Mode 8 USB – TTL converter without filtering(FF)(compatible with the past)
- Mode 9 USB – TTL with filtering (FF)
- Mode 10 Dialogue between key and PC with 3 initial (FF)(compatible with the past)
- Mode 11 Dialogue between key and PC without 3 initial (FF)

Communication and programming:
Interfaces
- non-isolated TTL
- RS485 interface, not isolated to PC or controllers
- Mini-USB to PC

Installation:
Case dimensions: 43 x 98 mm, depth 18 mm

Connections:
Communication port connection
TTL:
- Male connector: JST S 5B-PH-KL
- Female connector: SAMTEC SQT-105-02-L-S
RS485:
- Phoenix MC 1,5/3-G-3.5 Mini-USB
Power supply connector:Dc power jack 1.3mm

Connectable to:
Instruments with TTL port

Click here to dowload the drivers